Machining Workpieces; Grinding Workpieces; Grinding Zones - Dick SM-100 Originalbetriebsanleitung

Machining workpieces

8. Machining workpieces
8.1

Grinding workpieces

Grinding zones

1
2
Figure 8.1 – Grinding zones
[3] Grinding with underlay for straight grinding
[4] Grinding on the free belt for convex grinding (also called
crowned grinding)
Dirty knives can irreparably damage the grinding belt and
polishing wheel. The surfaces can heat with long-term use.
• Only machine clean knives.
• Switch off the belt grinder after 30 minutes at the latest.
NOTE
SM-100 belt grinder
8
25