Controls On The Belt Grinder; Switching On The Belt Grinder - Dick SM-100 Originalbetriebsanleitung

Putting into operation

Controls on the belt grinder

Figure 7.6 – Switches
[1] Switch for switching off (red, 0)
[2] Switch for switching on (green, I)
7.4

Switching on the belt grinder

Risk of injury due to damaged or incorrectly mounted
machine parts
Using the belt grinder with damaged electric parts or power
cables can cause injuries due to electric shocks or malfunctions.
Damaged grinding belts can be partly spun off the machine.
• Missing or damaged covers expose rotating parts and can
cause injuries due to crushing and drawing in. Check the belt
grinder for damage before each use, in particular:
- the grinding belt,
- the polishing wheel,
- the power cable,
- correct assembly and covering function of all covers and
the housing,
- the function of the switches.
• Replace damaged parts before using the belt grinder again.
WARNING
SM-100 belt grinder
7
1
21