Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
- 22 -
- Pull out the shoulder padding (H
gues from the released belt (H
- Remove the plastic covering of the belts lead-ins (6 pcs).
- Pull the belt lock through the slot in the cover.
GB
- Now you may pull the cover off without any problems.
6. 2. Putting the cover on
- Pull the belt and the lock back at the bottom part through
the specified slots in the cover. - Pull the belt lock' s tongues
(H
) and the shoulder-padding (H
2
- Join the lock (G) by means of both the lock (so as the belt
would not be twisted).
- Click the plastic coverings of the belts lead-ins to appropri-
ate openings (6 pcs).
- Pull the belt and the shoulder-padding loop through the
belt lead-in and then follow the instructions depicted by
Fig. 16.
7. Recommendation
The instructions for use make an integral part of the child
car seat. Please, place these instructions for use to the
storage pocket at the rear part of the child car seat.
8. Instructions for waste disposal
Please, observe waste disposal-related rules and regula-
tions being in force in your country.
Package disposal
Disposal of individual parts:
Covering, belts
Plastic parts
Metal parts
Lock and tongue
9. Guarantee (2 years)
In relation to this child car seat, we provide 2-year guarantee
for defects due to workmanship and material defects. The
guarantee period starts on the day of purchase. For the whole
guarantee period, please, keep the completed letter of gua-
rantee, the document of the check done on the handover of
the product, which has to be signed by you, and the proof of
purchase as evidence.
) and the belt lock' s ton-
1
).
2
) back on the belt.
1
Waste container for cardboard
cases
Residual waste,
Thermal utilization
In accordance with their
marking, to appropriate
containers
Container for metals
Residual waste
Werbung
Inhaltsverzeichnis
