Skoda ISOFIX G 0/1 Gebrauchsanleitung Seite 45

- Swing down the supporting frame (W).
- Pull on the yellow pulling lever (Q) until the colour in its
window changes from green to red –arrow-. Thus, the fra-
me will be released and it is possible to pull it out.
- Mounting of ISOFIX FWF frame (forward-facing)
GB
- 8 -
- Grasp the FWF frame in the middle of its front part and pla-
ce it positioning its arresting arms (T) in front of the sliding
sleeves (Y).
- 9 -
- Slide the frame to the sliding sleeves by slight rotary motion
(to the right and to the left).
- Audible ´ c lick´ sound is heard when the arresting arms snap
in both the ISOFIX anchor points. The correct anchorage of
the arms is shown in the window of the yellow pulling lever
(Q) -detail-. Green colour must be seen in the window.
Caution: Check if the frame is correctly fixed by tugging
at it strongly.
- Demounting of ISOFIX FWF frame
- 10 -
- Pull on the yellow pulling lever (Q) until the colour in its
window changes from green to red –arrow -. Thus, the fra-
me will be released and it is possible to pull it out.
3. 3. Mounting of the child car seat on the frame
When the safety shoulder belts have been adjusted (see
Fig. 4. 1.), mount the child car seat on the frame in the fol-
lowing way.
- Mounting of the child car seat on the RWF frame
- 11 -
- Push the co-driver' s seat as much forward as possible.
- Turn the yellow knob (B) to the vertical (open) position.
- Now place the child car seat (in the rear-facing direction) on
the blocking fixtures (S) of the RWF frame.
- Having placed the child car seat, turn the turn knob (B) back
to the horizontal (closed) position.
Check if the child car seat is correctly fixed by tugging at
it strongly.