Baxi Luna HT 1.850 Gebrauchsanleitung Seite 82

parameter parameter description
n.
p1 Time of day setting
p5 Minimum central heating temperature setting (°C)
p11 Start of first daily period of automatic central heating
p12 End of first daily period of automatic central heating
p13 Start of second daily period of automatic central heating
p14
End of second daily period of automatic central heating
p15
Start of third daily period of automatic heating
p16
End of third daily period of automatic central heating
p31
Start of first daily period of domestic hot water production (*)
p32 End of first daily period of domestic hot water production (*)
p33 Start of second daily period of domestic hot water production (*)
p34 End of second daily period of domestic hot water production (*)
p35 Start of third daily period of domestic hot water production (*)
p36 Fine End of third daily period of domestic hot water production (*)
p45 Reset of daily central heating and domestic hot water production programs (factory
settings). Press the - + keys together for about 3 seconds; the number 1 appears on the
display. Confirm by pressing either of the
Note: Parameters from p31 to p36 can be displayed only if the domestic hot water program has been enabled
as described in chapter 15 for the attention of the installer (parameter H91).
InstructIons pertaInInG to the user
3.7 table of user-settable parameters
keys
82
Factory range
setting
———- 0...23:59
25 25..80
6:00 00:00...24:00
22:00 00:00...24:00
0:00 00:00...24:00
0:00 00:00...24:00
0:00 00:00...24:00
0:00 00:00...24:00
0:00 00:00...24:00
24:00 00:00...24:00
0:00 00:00...24:00
0:00 00:00...24:00
0:00 00:00...24:00
0:00 00:00...24:00
0 0...1
912.198.1 - GB