Cleaning And Care - Powerfix Z16531 Bedienungsanleitung

2. Adjust the impact force to suit the materials,
staples or nails.
3. Press the operating lever
Examples of use:
The stapler gun is suitable for the following purposes:
- Attaching coverings to the seating surface of
chairs.
- Attaching a skirting at the joint between wall
and floor coverings.
- Stretching and stapling canvasses to frames.
- Attaching protective films to insulation materials
when installing thermal insulation.
- Attaching decorative materials.
© Removing staples
To avoid the risk of injury!
Ensure that the operating handle
pressed
Push the hook 3
(see Fig. F).
Pull the rear part of the stapler gun upwards to
draw out the staple or nail from the workpiece.
© Removing jammed staples
from the stapler gun
Staples or nails may become jammed in the stapler
gun during operation. Remove jammed staples as
follows:
1. Press in the staple pusher
pull it downwards. Then pull the staple pusher
completely out of the magazine
2. Turn the stapler gun over so that the magazine
4 is pointing upwards.
3. Press the magazine
backwards and pull the magazine
(see Fig. E).
4. Now remove the jammed staples from the
magazine 4 .
5. Press the magazine
backwards and press it downwards until it en-
gages to fix the magazine
B+DQGWDFNHUB&RQWHQWB/%LQGG 
1 down firmly.
1 will not be
under the staple or nail head
2 slightly and then
2
4 .
at the side wings
4 5
4 upwards
4 at the side wings 5
4 back in place.
Operation / Cleaning and care / Disposal
Note: Do not use the stapler gun if it shows more
serious defects (damage to body etc.). If necessary
have your stapler repaired by a qualified specialist.
Take note that the manufacturer's original spare
parts only should be used in any repair.
Tips
©
1. In order to have a good quality of stapling, it is
suggested to fill only one of staple / nail type in
the staple gun in each time.
2. When you want to change other types of sta-
ples, please make sure all remaining staples /
nails are used up or not in staple gun before
insert other types of staples/nails.
©

Cleaning and care

The product must be kept clean, dry and free
of oil or lubricants at all times.
Clean the product with a slightly dampened,
non-fluffing cloth.
Never use corrosive or abrasive cleaning
agents. These may damage the surface of the
product.
©
Disposal
The packaging is made entirely of recy-
clable materials, which you may dispose
of at local recycling facilities.
Contact your local refuse disposal authority for more
details of how to dispose of your worn-out product.
Product description:
+DQGKHOG VWDSOHU VHW
Model No.: Z16531

Version:
GB/IE 7