Reely SKY Agusta A109 Bedienungsanleitung Seite 50

• On the opposite side, remove the attachment screw (5)
from the deflection pulley (fig. 12).
• Lift the toothed belt from the shaft (6) and push the rotor
shaft out of its bearing (fig. 12).
• The rear rotor is now dismounted as shown in fig. 13.
• Retract the receiver aerial to the inside.
• Remove the four screws on the fuselage bottom in front
of the main landing gear.
• Carefully take out the complete mechanical unit towards
the front.
• Proceed in reverse order to install the mechanical unit
again.
When assembling, use threadlocker to secure metal screws screwed into metal parts.
Be sure to check all screw connections, functions and the rotating direction of the rear rotor before the next
start. Should the rear rotor be turning in the wrong direction, the driving belt has to be installed to the rear
rotor drive twisted.
50
Figure 12
Figure 13