Cleaning Instructions. Certifigates - BENE K2 Montageanleitung

CLEANING INSTRUCTIONS. CERTIFIGATES

Gentle and proper cleaning of furniture surfaces and partition
walls is especially important in retaining their optimum con-
dition for as long as possible.
We generally recommend cleaning with a moist, fluff-free
cloth, moistened with pure water without the addition of any
cleaning agents; furniture polishes or similar.
If cleaning with a damp cloth proves not to be adequate,
careful use of a mild plastics cleaner without abrasive addi-
tive is admissible on melamine surfaces.
Wood polishes must not be used on open-pored lacquered
veneer surfaces (oak, walnut, ash and bamboo). This settles
into the open pores, closes them and gives the surface a
greasy, glossy appearance after a while. The desired semi-
gloss and open-pored veneer appearance is ruined.
Furniture polishes available off-the-shelf can be used for
closed-pore lacquered surfaces (cherry, beech and maple).
They fill the finest of scratches in the lacquer and cover
them up relatively well. An enhanced glossy appearance of
the surface is difficult to prevent.
Never use polishes containing silicon, caustic cleaning agents
with ammonia additives, alcohol or softeners. The same
applies for scratching cleaning agents with abrasive additives.
Glass and material surfaces are to be cleaned in accordance
with manufacturer's instructions. Please contact Bene for
information and documentation on this matter.
Bene can not assume any liability for damage to surfaces
caused as a result of improper cleaning.
Gottfried Fuchs
(Head of QSE Management)
DISPOSAL
Instructions for the disposal of Bene products can be found in
the sustainability report at: http://www.bene.com
16
Bernhardt Kronnerwetter
(Director Production)