Safety Notes - Renkforce HF-900 HAZER Bedienungsanleitung

5. Safety Notes

Read the operating instructions attentively and particularly observe the safety notes. If the
safety notes and the information in these operating instructions regarding proper handling are
not observed, we assume no liability for any resulting injury/property damage. In such cases, the
warranty/guarantee will also lapse.
• The device is designed according to protection class I. The only permissible voltage source is a proper
grounded mains socket (220-240 V/AC, 50/60 Hz) of the public mains.
• The mains socket must be close to the device and easily accessible.
• Any devices not in use must be powered down. For this, pull the mains plug from the mains socket.
• All persons operating, installing, setting up, commissioning or servicing this device must be trained and
qualified accordingly and observe these operating instructions.
• Never touch the mains plug with wet or damp hands. There is a risk of potentially fatal electric shock!
• Make sure that the mains cable is not squeezed, bent, damaged by sharp edges or put under mechanical
stress. Avoid excessive thermal stress on the mains cable from extreme heat or cold. Do not modify the
mains cable. Otherwise the mains cable may be damaged. A damaged mains cable can cause a deadly
electric shock.
• Do not touch the mains cable if it is damaged. First, power down the respective mains socket on all
poles (e.g. via the respective circuit breaker and FI switch) and then carefully pull the mains plug from
the mains socket. Separate the mains cable from the device and replace it. Never use the product if the
mains cable is damaged.
• When setting up/installing the device, make sure that the mains cable is not squeezed or damaged by
sharp edges.
• Never place containers containing liquids, e.g. glasses, buckets, vases or plants on the device or in its
vicinity. Liquids may get into the housing and impair electrical safety. This also poses great danger of fire
or potentially fatal electric shock! If this is the case, first power down the respective mains socket on all
poles (e.g. switch off circuit breaker and FI switch) and then pull the mains cable from the socket. Do not
operate the product anymore afterwards, but take it to a specialist workshop.
• Do not place any open sources of fire, such as burning candles, on or directly next to the device.
• Never operate the device unattended.
• Only operate the device in moderate climates, never in tropical climates.
• Protect the product from extreme temperatures direct sunlight, high humidity, moisture, flammable gases,
vapours and solvents.
• Do not subject the product to heavy mechanical stress.
• Handle the product with care. Impact, blows or falls from even a low height will damage the product.
• Also observe the safety notes and operating instructions of the other devices to which the product is
connected.
21