Safety Information - Renkforce FL-01RG Bedienungsanleitung

4. Safety Information

The warranty/guarantee will expire if damage is incurred resulting from non-compliance with
these operating instructions. We do not assume liability for any consequential damage.
Nor do we assume any liability for damage to property or personal injury caused by improper
use or failure to observe the safety instructions. In such cases the warranty/guarantee is vo-
ided.
Dear Customer: The following safety information is intended not only for the protection of the
device but also for the protection of your health. Please read the following items carefully:
• To ensure that the device is set up correctly, always read these operating instructions inclu-
ding the safety instructions thoroughly and attentively before use.
• The operator must observe the country-specific accident prevention regulations of the associ-
ation of the industrial workers' societies for electrical equipment and utilities.
• Assembly, commissioning and operation of this product shall require correspondingly qualified
specialist staff and must only be performed under consideration of the requirements named in
these instructions.
• Setting and maintenance work must only be performed by a trained specialist who is familiar
with the respective dangers. Improperly performed setting work may cause dangerous laser
irradiation.
• For safety reasons, any unauthorized conversions and/or modifications to the product are not
permitted.
• The entrepreneur must report them to the relevant accident insurance company and the aut-
hority relevant for work protection (usually the trade supervision) before initial commissioning
and designate a laser protection officer.
• When operating the laser device, always observe that the laser beam is guided so that no per-
sons are present in the projection area and that inadvertently reflected beams (e.g. by mirrors)
cannot reach the area where persons are present.
• Laser radiation may be dangerous if the laser beam or a reflection enters the unprotected eye.
Therefore, familiarise yourself with the statutory regulations and measures of precaution for
the operation of this kind of laser device before using the laser facility.
• Never look into the laser beam and never point it at people or animals. Laser irradiation may
cause eye or skin damage.
• Never look into the laser beam with optical instruments (such as magnifying glasses or te-
lescopes). The risk of eye injury would drastically increase again.
• Never point the laser beam at any mirrors or other reflection surfaces. The uncontrolledly
reflected beam may hit persons or animals.
• Only operate the laser in monitored areas.
• Limit the beam path by shields or mobile walls where possible.
• Mark the laser area by barriers or warning signs.
23