Conrad Electronic 75 11 44 Bedienungsanleitung Seite 37

4. Recording duration (motion detect count)
With this optoin you can set the recording duration for motion detect.
• Select the „Motion detect count" option with the left/right arrow keys of the control cross (S).
• Press the „SET" (H) key to switch between a recording duration of 1, 3 or 5 seconds. The figure dis-
played in brackets displays the selected recording duration.
5. Recording interval (motion detect interval)
With this optoin you can set minimum intervals a recording with motion detect should take place.
• Select the „Motion detect interval" option with the left/right arrow keys of the control cross (S).
• Press the „SET" (H) key to switch between a minimum recording interval of 1, 3 or 5 seconds.
6. Motion detection sensitivity
• Select the „Motion detect sensitivity" option with the left/right arrow keys of the control cross (S).
• Press the "SET" (H) key to access the settings menu for the motion detect sensitivity.
• Select the desired motion detect sensitivity (target value) with the up/down arrow keys of the control
cross (S).
Please note that the sensitivity levels can be set from 01 - 99.
Very sensitive = level 01, very insensitive = level 99.
The „Current value" displays shows what the current motion detect sensitivity is
currently enabled. If the displayed current value exceeds the set target value, a
recording is made.
The dotted line displayed marks the set motion detect area.
• Press the "SET" (H) key to confirm the settings.
„EXIT" option
With this optoin, you can return to the display mode.
• Select the „EXIT" option with the left/right arrow keys of the control cross (S).
• Press the „SET" (H) key in order to leave the settings mode and access the display mode.
37