Conrad Electronic 75 11 44 Bedienungsanleitung Seite 30

O „CH 4" key
Press the „CH 4" key in display mode in order to display video channel 4 on your display device.
P „CH 4" LED
Illuminates as soon as video channel 4 is displayed on the display device.
Q „PLAYBACK" key
Press the „PLAYBACK" key to access the playback mode.
R „DOORLOCK" key
If you have connect an electric doorlock (see Section 9a), you can activate the door opener by pres-
sing the „DOORLOCK" key.
S Control cross
Control cross „left, right, top, bottom" for the operation of the settings menu or moving the picture sec-
tion in zoom mode. The control cross is also used to control (tilt and rotate) the connected cameras.
T „POWER IN" low voltage socket
For connection to the extgernal mains adapter (12 V/DC 500 mA).
U „VOLUME" settings wheel
Serves to set the volume
V „CH 4" connection socket
For the connection of external video signal sources (e.g. surveillance cameras) with analogue video
output.
W „CH 3" connection socket
For the connection of external video signal sources (e.g. surveillance cameras) with analogue video
output.
X „CH 2" connection socket
For the connection of external video signal sources (e.g. surveillance cameras) with analogue video
output.
Y „CH 1" connection socket
For the connection of external video signal sources (e.g. surveillance cameras) with analogue video
output.
Z AUDIO and VIDEO connectors
For the connection of a surveillance camera or TV set with video input and analogue video input. The
yellow cinch socket leads the video signal and the white cinch socket the audio signal.
30