Renkforce 751074 Bedienungsanleitung Seite 57

Programming the opening sound
81 1
81 0
Programming the access mode (multi-user mode only)
82 1
82 0
Note: In single user mode, the user code and the master code must be 4 digits long.
Programming the key tones
83 1
83 0
# When an output (relay) is activated, the device pro-
duces an opening sound for 1 second. This can occur
through the entry of a user code or via operation of an
"Open" button. This feature is very useful when the ope-
ration of the door opener is inaudible (e.g. DC operated).
# No opening sound. Only the conformation sound when
entering codes is generated.
# Auto mode (default setting). The # key does not need to
be pressed after the code has been entered. However,
the user code must have the same number of digits as
the master code.
# Manual mode. The # key must be pressed to activate
the code lock. The user code can have between 4 and 8
digits, regardless of the length of the master code.
# The key tone is generated each time a key is pressed.
# All key tones are switched off.
57