Renkforce 751074 Bedienungsanleitung Seite 49

The "DOOR" LED illuminates when the door opener is operated, the "ALARM"-LED dis-
plays the status of the alarm.
Relay output 2 is used for controlling the alarm system. Please read the operating ma-
nual of your alarm system to determine what type of contact (N.O./N.C.) you require.
Connect the sabotage contact to a 24 h alarm loop using an "N.C." contact.
The connection of contact "O/P 3" (output 3) and "O/P 1. INHIB" (access control) can
be optionally used. User code 3 can deactivate the switching feature of the code lock
(e.g. at night, outside normal office hours). Programming is carried out in mode "61".
When the function is active, the green"AUX" LED illuminates.
Connect contact "(-) GND" to the minus (GND) connection of the alarm system.
When access control is activated, make sure that no-one is in any of the
locked rooms or buildings, because all switching functions are disabled for
the period that access control is activated.
49