Renkforce 751074 Bedienungsanleitung Seite 54

Programming master and user codes for several users
User
0
1 00 - 99
2 0 - 9
3 0 - 9
Programming the "Output 1" relay
40 1 to 999
41
42
54
Digits
4 to 8 #
4 to 8 #
4 to 8 #
4 to 8 #
# After entering User code 1 and pressing the # key, re-
lay 1 switches on for the programmed time (1 to 999
seconds).
# After entering User code 1 and pressing the # key, relay
1 toggles (either from closed to open or from open to
closed).
# After entering User code 1 and pressing the # key, relay
1 toggles (from closed to open or vice-versa).
This programming also allows the use of a short code
for switching (the first two digits of code 1).
After entering "0" you can program the
Master code to any value. This can have
4 to 8 digits. Press the # key to save this.
After entering "1" you can program user
code 1 to any value. This can have 4 to 8
digits for 100 users (00 - 99). Press the #
key to save this.
After entering "2" you can program user
code 2 to any value. This can have 4 to 8
digits for 10 users (0 - 9). Press the # key
to save this.
After entering "3" you can program user
code 3 to any value. This can have 4 to 8
digits for 10 users (0 - 9). Press the # key
to save this.