Herunterladen Inhalt Inhalt Diese Seite drucken

Important Safety Instructions - Yamaha CLP-705 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

IMPORTANT SAFETY INSTRUCTIONS

INFORMATION RELATING TO PERSONAL INJURY, ELETRICAL SHOCK, AND
FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST.
WARNING
------ When using any electrical or electronic
product, basic precautions should always be followed. These
precautions include, but are not limited to, the following:
1
■ Read all Safety Instructions, Installation Instructions, Spe­
cial Message Section items, and any Assembly Instructions
found in this manual BEFORE making any connections, includ­
ing connection to the main supply.
Ctw Main Power Supply Verification: Yamaha products are
manufactured specifically for the supply voltage in the area
where they are to be sold. If you should move, or if any doubt
exists about the supply voltage in your area, please contact
your dealer for supply voltage verification and (if applicable)
instructions. The required supply voltage is printed on the
name plate. For name plate location, please refer to the
graphic found in the Special Message Section of this manual.
Om This product may be equipped with a polarized plug (one
blade wider than the other). If you are unable to insert the plug
into the outlet, turn the plug over and try again. If the problem
persists, contact an electrician to have the obsolete outlet
replaced. Do NOT defeat the safety purpose of the plug.
4
Some electronic products utilize external power supplies
or adapters. DO NOT connect this type of product to any
power supply or adapter other than one described in the own­
ers manual, on the name plate, or specifically recommended
by Yamaha.
O- WARNING: do not place this product or any other objects
on the power cord or place it in a position where anyone could
walk on, trip over, or roll anything over power or connecting
cords of any kind. The use of an extension cord is not recom­
mended! If you must use an extension cord, the minimum wire
size for a 25' cord (or less) is 18 AWG. NOTE: The smaller the
AWG number, the larger the current handling capacity. For
longer extension cords, consult a local electrician.
O.
Ventilation: Electronic products, unless specifically
designed for enclosed installations, should be placed in loca­
tions that do not interfere with proper ventilation. If instructions
for enclosed installations are not provided, it must be assumed
that unobstructed ventilation is required.
7. Temperature considerations: Electronic products should
be installed In locations that do not significantly contribute to
their operating temperature. Placement of this product close to
heat sources such as; radiators, heat registers and other
devices that produce heat should be avoided.
PLEASE KEEP THIS MANUAL
8. This product was NOT designed for use in wet/damp
locations and should not be used near water or exposed to
rain. Examples of wet/damp locations are; near a swimming
pool, spa, tub, sing, or wet basement.
This product should be used only with the components
supplied or; a cart, rack, or stand that is recommended by the
manufacturer. If a cart, rack, or stand is used, please observe
all safety markings and instructions that accompany the acces­
sory product.
10
- The power supply cord (plug) should be disconnected
from the outlet when electronic products are to be left unused
for extended periods of time. Cords should also be discon­
nected when there is a high probability of lightning and/or elec­
trical storm activity.
11
■ Care should be taken that objects do not fall and liquids
are not spilled into the enclosure through any openings that
may exist.
12.
Electrical/electronic products should be serviced by a
qualified service person when:
a. The power supply cord has been damaged; or
b. Objects have fallen, been inserted, or liquids have been
spilled into the enclosure through openings; or
c. The product has been exposed to rain; or
d. The product does not operate, exhibits a marked
change in performance; or
e. The product has been dropped, or the enclosure of the
product has been damaged.
13.
Do not attempt to service this product beyond that
described in the user-maintenance instructions. All other ser­
vicing should be referred to qualified service personnel.
14.
This product, either alone or in combination with an
amplifier and headphones or speaker/s, may be capable of
producing sound levels that could cause permanent hearing
loss. DO NOT operate for a long period of time at a high vol­
ume level or at a level that is uncomfortable. If you experience
any hearing loss or ringing in the ears, you should consult an
audiologist. IMPORTANT; The louder the sound, the shorter
the time period before damage occurs.
15.
Some Yamaha products may have benches and/or
accessory mounting fixtures that are either supplied as a part
of the product or as optional accessories. Some of these items
are designed to be dealer assembled or installed. Please make
sure that benches are stable and any optional fixtures (where
applicable) are well secured, BEFORE using. Benches sup­
plied by Yamaha are designed for seating only. No other uses
are recommended.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis