Function Of The Keys - Renkforce CD-3308 Bedienungsanleitung

Function of the keys

• Station buttons 1-6 (4)
If you shortly press these buttons, you can select a station you have pre-set.
If you want to store a station you are listening to, simply press the desired button for more than 1 second.

Every one of the three FM ranges (FM1-3) has six station buttons. Therefore you can assign 18 station
buttons.
• AF button (5)
The AF button (5) activates the automatic transmitter station tracking.
"AF" will be displayed. If the reception of an RDS transmitter station gets weaker or the radio does not receive and
RDS station at all, the display flashes. When a station can be received well, the symbol is displayed continuously.
When an RDS station is being received, the name of the station is displayed.
When you leave a transmission area, the radio can only switch to a better sender when the AF function is activated.
Regional identification
Press the AF button (5) for about 2 seconds until the display shows REG ON or REG OFF. When you press the AF
button once more, you switch between these two modes. The normal display reappears automatically after a few
seconds.
If REG ON is on and the reception gets weaker, the radio only switches to a different frequency with exactly the same
progamme.
When the regional identification is off (REG OFF), and the reception gets weaker, the radio switches to a different
transmitter station with the same regional identification.
55