Cd Operation - Renkforce CD-3308 Bedienungsanleitung

• UP/DOWN buttons (11)
With these buttons the receiving frequency can be changed to adjust stations in radio operation.
By shortly pressing a button, the frequency is changed manually step by step.
By pressing a button longer, you activate the auto-scan. The auto-scan only stops at the next station that can be
received well.
• A/PS button (12)
If you press this button shortly, the stations stored on the station buttons 1-6 (4) are played for 5 seconds each. To
stop the auto-scan, press the button again.
When you keep the button pressed, all the stations that can be received well are stored on the station buttons 1-6
(4).
After this procedure, the stored stations are played for 5 seconds each, as described above.
• SCN button (13)
This button starts the auto-scan.
When a station has been found, it is played for 5 seconds and then the auto-scan is continued.
Press the button again to stop the auto-scan to listen to the currently played station.

CD Operation

• UP/DOWN buttons (11)
With these buttons you can select individual tracks of a CD or search for a certain section within one CD track.

The arrows on the buttons indicate the search direction (up or down).
Only press the buttons shortly to jump to the next or previous track.
Press the buttons longer to search a certain section within one track. The CD is now in fast replay.
58
Operating Instructions

English