Initial Operation; Inserting The Batteries; Battery Charge Level Display - FLORABEST FTUS 3.6 A1 Originalbetriebsanleitung

Initial operation

GB
This section provides you with important information on handling and
IE
using the device.
DANGER
During the initial start-up of the device there is
a risk of injury and/or damage to property!
To avoid risks, observe the following safety instructions:
► Packaging material must not be used as a plaything.
Risk of suff ocation.
► Please follow the instructions regarding the electrical connec-
tion of the device to avoid damage to property.

Inserting the batteries

NOTE
► The batteries are preinstalled on delivery.
♦ To insert the batteries
ment cover
compartment cover
♦ Insert 3 x 1.2 V batteries into the battery compartment. Please
observe the polarity, which is marked in the battery compartment.
Otherwise the device will not work and can be damaged.
♦ Close the battery compartment lid
is inserted.

Battery charge level display

The battery condition is displayed using a red illuminated or blinking
LED in the movement sensor
LED lit:
LED fl ashing:
8
in the device, open the battery compart-
by unscrewing the 4 Phillips screws in the battery
.
.
batteries full
batteries empty
and ensure that the seal
FTUS 3.6 A1