Manual Filter Operation; Effect Frequency Filter Operation - Pioneer DJM-700-S Bedienungsanleitung

EFFECT FUNCTIONS

MANUAL FILTER OPERATION

1 MANUAL FILTER
The filter frequency is shifted, resulting in strong changes to
the tone.
Rotating the dial to the right produces high-pass filter effects,
while rotating the dial to the left produces low-pass filter
effects.
Low-pass filter
FREQUENCY
LPF
Frequency
The manual effecter is linked to the FREQUENCY dial. The output
sounds of the manual effecter become the input sounds for the
beat effect.
• When the beat effect type is set to ROLL, REVERSE ROLL, UP
ROLL, or DOWN ROLL, the beat effect's output sound becomes
the input sound for the manual effecter.
1 Press the FILTER button so that it flashes.
• Confirm that the FILTER button flashes steadily.
• When it lights, press the button so that it flashes. Each time
the button is pressed, it alternates between flashing and
lighting steadily.
• When power is first turned ON, defaults to steadily lighted.
2 Use the effect channel select switch to choose the channel to
which you wish to apply the effects.
• The name of the selected channel will appear in the display's
channel name section.
• When [MIC] is selected, the effect will be applied to both
microphone 1 and microphone 2.
3 Use the FREQUENCY dial to adjust the filter's cutoff
frequency.
• Rotate counterclockwise to apply a low-pass filter.
• Rotate clockwise to apply a high-pass filter.
High-pass filter
HPF
Frequency
1
FILTER
3
FREQUENCY
2

EFFECT FREQUENCY FILTER OPERATION

1 Effect frequency filter
Sets the filter's cutoff frequency, allowing the beat effect to be
applied to a desired frequency band alone.
Through
FREQUENCY
LPF
Frequency
Beat effect
The effect frequency filter is linked to the FREQUENCY dial. The
beat effect is applied only to the selected frequency band.
• The function is not supported when SEND/RETURN is selected
as the type of beat effect.
1 Press the FILTER button so that it lights.
• Confirm that the FILTER button lights steadily.
• When flashing, press the button so that it lights. Each time
the button is pressed, it alternates between flashing and
lighting steadily.
• When power is first turned ON, defaults to steadily lighted.
2 Operate the beat effect.
• For details, see page 18.
3 Use the FREQUENCY dial to select the frequency to which
you wish to apply the beat effect.
• Rotate counterclockwise to apply the effect to low-range
sounds only. High-frequency sounds are set to through.
• Rotate clockwise to apply the effect to high-range sounds
only. Low-frequency sounds are set to through.
Through
HPF
Frequency
Beat effect
2
FILTER
3
FREQUENCY
19
En