Pioneer DJM-700-S Bedienungsanleitung Seite 15

MIXER OPERATIONS
[Using the Cross Fader to Start Playback]
FADER
1
START
1, 2
CROSS
2
FADER
ASSIGN
A / THRU / B
1 Press the FADER START button for the channel (1, 2)
connected to the CD player you wish to control.
• The button for the selected channel lights.
2 Set the CROSS FADER ASSIGN switch for the selected channel
to [A] or [B].
• Select [A] to assign to cross fader channel A (left side).
• Select [B] to assign to cross fader channel B (right side).
3 Move the cross fader lever to the full opposite side away
from the CD player you wish to start.
4 Set the CD player to the desired cue point, and engage cue
point standby.
• If a cue point has already been set, it is not necessary to set
the CD player to standby at the cue point.
5 At the instant you wish to start playback, move the cross
fader lever.
• CD player begins playback.
• After playback has begun, if the cross fader lever is moved
fully to the opposite side, the CD player assigned to the
opposite side channel will return to the cue point and enter
standby mode (back cue).
3 5
15
En