Selecting The Playback Source; D) 3D Sound Function; E) Reset - Renkforce S27 Bedienungsanleitung

Operation
c) Selecting the Playback Source
• Press the SOURCE button (2) at the device repeatedly until the desired playback source is displayed on the left
side of the display.
• Alternatively, the playback source can also be directly selected with the buttons AUX (7), LINE 1 (8) or LINE 2
(13) on the remote control.
Display:
AU.20 >
L1.20 >
L2.20 >

d) 3D Sound Function

• Press the 3D ON (9) button on the remote control to switch on the 3D sound function (surround sound simulation).
• Press the 3D OFF (10) button on the remote control to switch off the 3D sound function (surround sound
simulation).
• The 3D sound function may also be switched on or off using the 3D SOUND (3) button at the device.
• The function's status is indicated on the display for a few seconds if a button is pressed.
Display:
3dON >
3dOF >

e) Reset

• Press the RESET button (14) to reset volume to the factory settings (value 20).
AUX INPUT (18) input selected
LINE 1 (20) input selected
LINE 2 (19) input selected
3D sound function on
3D sound function off
27