B) Connection; Connecting The Inputs; Connecting The Power Supply - Renkforce S27 Bedienungsanleitung

Start-Up

b) Connection

Before connecting the device, ensure that the mains plug is disconnected. Before connecting
the device, turn off all other devices to be connected to the soundbar.

Connecting the inputs

Only use the included or other suitable shielded audio cables for connection of the inputs. Use
of any other cables may cause interferences.
To avoid distortion or mismatching that may damage the device, only sources with a low-level
audio output must be connected to the soundbar inputs. Never connect audio device speaker
outputs here.
Connect your audio devices to the audio inputs AUX INPUT (18), LINE 1 (19) and LINE 2 (20).

The white RCA socket at the AUX INPUT connection is connected to the left PCR output of the control
source. The red RCA socket is connected to the right RCA output of the control source.

Connecting the power supply

The POWER (17) mains switch must be switched off.
• Connect the mains plug of the sound bar to a socket (230 V/50 Hz) of the public mains supply.
24
Operating Instructions

English