Led Status Overview; Button Functions - Conrad 75 17 71 Bedienungsanleitung

10. LED status overview

LED
all LEDs are red
Error (14)
Status (15)
Akku (16)

11. Button functions

Button Function/Explanation
Loop/Clear (2) Hold down this button for three seconds to delete all files from the
memory card. When deletion is successful, "F0:" is shown on the
display (13) followed by 0 (0 represents the number of video files).
Press the "Loop/Clear" button (2) shortly to activate or deactivate
continuous recording.
State
not lit
lit
not lit
flashing slowly
lit
flashing quickly
not lit
lit
Continuous recording activated
(when disk space is full, the oldest data will be
overwritten).
Continuous recording deactivated
(when disk space is full, recording stops).
Meaning
normal operation
- an error occurred
- USB mode active
no power supply
normal operation
- an error occurred
- USB mode active
motion detected
battery fully charged
charging
29