Features - Renkforce DL-PAR106 LED-Spot 5 x 3 W Bedienungsanleitung

• Never place containers containing liquids, e.g. glasses, buckets, vases or plants on the device
or in its vicinity. Liquids may get into the housing and impair electrical safety. This also poses
great danger of fire or potentially fatal electric shock! If this is the case, first power down the
respective mains socket (e.g. switch off circuit breaker) and then pull the mains cable from the
socket. Do not operate the product anymore afterwards, but take it to a specialist workshop.
• Do not expose the device to any high temperatures, dripping or splashing water, strong vibra-
tions or heavy mechanical stress.
• Do not place any open sources of fire, such as burning candles, on or directly next to the de-
vice.
• Consult an expert if you are unsure as to the function, safety or connection of the product.
• Never operate the device unattended.
• Only operate the device in moderate climates, never in tropical climates.
• Do not leave any packaging material unattended. It may become a dangerous toy for children.
• In commercial institutions, the accident prevention regulations of the Employer's Liability Insu-
rance Association for Electrical Systems and Operating Materials are to be observed.
• If you are not sure of the correct connection or if there are any questions that are not covered
by the operating instructions, do not hesitate to contact our technical support or another spe-
cialist.

5. Features

• 1 to 7-channel DMX control (switchable)
• Integrated controller for automatic mode, master-slave mode and sound-to-light control
• Programming possible via enclosed IR remote control
• 27 sound-to-light effects
• 29 colours
• 23 automatic effects
• 10 fade effects
• 5 LED high-performance luminaires with 3 W output each
• LED display for easy programming
• Mains output to direct power supply of other light effects
28