B) Inserting Light Scenes; C) Calling Running Light Functions - Renkforce Show Design 2 Bedienungsanleitung

• If you want to use a light scene that you have already saved, push the function button SCENE (2) and
select the desired light scene with the selection buttons 1-16 (9).
• Push the REC/ENTER (4) button to save the first light scene. All LEDs will flash briefly to display success-
ful storage.
• The display switches to STEP 001.
• Repeat storing light scenes as described until all light scenes for the running light function are saved.
• Push the REC/ENTER (4) button until the programming mode is left again.

b) Inserting Light Scenes

• Keep the REC/ENTER button (4) pushed until the associated LED lights up and the display (12) shows
PROGRAM.
• Push the function button CHASE (2).
• Select the desired running light function in which a light scene is to be inserted with the selection
buttons 1-16 (9).
To select the memory slots 1-16, level A must be selected with the PAGE (10) button. For memory
slots 17-32, level B must be selected with the PAGE (10) button.
• Use the dial switch PAN (11) to select the step (STEP) behind which the new light scene is to be in-
serted.
• Push the MENUS/ESC (5) button. The LED INSERT lights up.
• Push the function button SCENE (2) and select the light scene to be inserted with the selection
buttons 1-16 (9).
• Push the REC/ENTER (4) button to save the changed running light function. All LEDs will flash briefly to
display successful storage.
• Repeat the process described to insert further light scenes.
• Push the REC/ENTER (4) button until the programming mode is left again.

c) Calling Running Light Functions

Before a running light function can be called, it must be programmed and saved as described.
The running light function can be played manually, time-controlledly or in time with the music. Manual
mode is always active by default. The operating mode is displayed by the operating mode display (8).
MANUAL Manual mode
MUSIC Sound-to-light mode
AUTO Time-controlled mode
No effect lights or light scenes must be activated. If one of the LEDs at selection buttons 1-16 (9)
is lit, unselect it accordingly.
50