Basic Operation; Addressing And Basic Settings; A) Pre-Programmed Addressing Of The Effect Lights - Renkforce Show Design 2 Bedienungsanleitung

10. Basic Operation

• The channel faders (1) and the dial switches PAN (11) and TILT (13) influence the DMX channels of the
effect lights.
• The function buttons CHASE/SCENE/MOVEMENT/FIXTURE (2) specify what the selection buttons
1-16 (9) select.
CHASE activates the selection of the 32 running light functions.
SCENE activates the selection of the 32 light scenes.
MOVEMENT activates the selection of the 9 programmes for moving heads or the 7 programmes for
effect lights.
FIXTURE activates the selection of the 32 effect lights.
• The PAGE (10) button switches the level A or B for the selection buttons 1-16 (9).
Level A (LED A lit) > functions 1-16
Level B (LED B lit) > functions 17-32

11. Addressing and Basic Settings

a) Pre-Programmed Addressing of the Effect Lights

The DMX controller assigns starting addresses in steps of 18 to the 32 encodable effect lights. Therefore,
encode the stating addresses of your effect lights in steps of 18 as well; otherwise, individual addressing of
the start addresses will be required (see „Individual addressing of the effect lights" in the next section).
Effect light Start address
1 001
2 019
3 037
4 055
5 073
6 091
7 109
8 127
9 145
10 163
11 181
Effect light Start address
12 199
13 217
14 235
15 253
16 271
17 289
18 307
19 325
20 343
21 361
22 370
Effect light Start address
23 397
24 415
25 433
26 451
27 469
28 487
29 505
30 free
31 free
32 free
41