G) Switching The Outdoor Sensors; H) Maximum/Minimum Values; Displaying Values; Deleting/Resetting Values - Renkforce 1267659 Bedienungsanleitung

g) Switching the Outdoor Sensors

• When more than one outdoor sensor is logged on to the weather station, briefly push
the button „CHANNEL" (3) to switch between the outdoor sensors and display their
measured values. The respective sensor/channel number is displayed at the lower
left next to the outdoor temperature.
• If switching between the outdoor sensors is to take place automatically, push the
button „CHANNEL" (3) repeatedly until the symbol „
the display.
The measured values of the outdoor sensors are displayed here in sequence for a few
seconds (and the associated sensor/channel number).
These functions of the button „CHANNEL" are only available when more than
one outdoor sensor is logged in at the weather station.

h) Maximum/Minimum Values

Displaying Values

The weather station saves the extremes for the indoor/outdoor temperatures, indoor/
outdoor humidity and barometric pressure. Briefly press the button „MEM" (8) repeatedly
to switch between the following displays:
• Maximum values
• Minimum values
• Current measured values
The display of the maximum or minimum values will automatically return to the
display of the current values after a few seconds if no button is pushed.

Deleting/Resetting Values

The weather station automatically resets the values at 0:00 AM every day. Difficult manual
resetting is therefore not required.

i) Graphical Progress for the Barometric Pressure

The weather station shows a graphic progress display of the barometric pressure of the
past 12 hours in the upper right of the display. Here, you can observe how the barometric
pressure has changed in the 12 hours.
" appears in the lower left of
41