Caractéristiques Techniques; Intended Use - Conrad 75 01 22 Bedienungsanleitung

Caractéristiques techniques
Contact ..............................................: 1 contact NO (état normal ouvert)
Sabotage ...........................................: Boucle de ligne pour 24 h ou sabotage
Tension de commutation ...................: max. 30 V DC
Courant de commutation...................: max. 25 mA
Dimensions
Numéro de commande 750122 .........: l x l: 595 x 178 mm
Numéro de commande 750188 .........: l x l: 595 x 178 mm
20
Introduction
GB
Dear Customer,
We thank you for purchasing this pressure mat
With this device you have acquired a product built to the latest technological stan-
dard.
This product fulfils the requirements of applicable European and national directives.
Conformance to these has been proven; the relevant statements and documents are
lodged with the manufacturer.
To maintain this condition and to guarantee safe operation, the user must observe
these operating instructions!
In case of questions, consult out technical information service:
Tel. +49 (0)180 5 31 21 17
Mon. - Fri. 08.00 to 18.00

Intended use

The pressure mat is suitable for monitoring doorways. Its function is to detect
unwanted visitors obtaining unauthorised access in your absence. The pressure mat
is conceived exclusively for operation in dry, indoor rooms.
This product is only permitted for operation at 30 V DC 0.1 A maximum and with resi-
stive loads.
Any other use than as described above can lead to damage to this product; Moreo-
ver, this can be accompanied by hazards such as for example short-circuit, fire, elec-
tric shock, etc.
The product as a whole should not be modified or converted!
The safety instructions are to be followed without fail!
9