SPORTSTECH F50 Benutzerhandbuch Seite 108

HOW TO OIL THE TREADMILL:
1. As shown in the figure, it needs to oil the running belt after the treadmill is used for some time. Lift one side of
the running belt, place the silicone oil bottle below the running belt and apply silicone oil to running board. (Apply
silicone oil to the middle of running board)
2. Turn on the treadmill to run for some time after oiling to uniformly apply silicone oil to running belt.
NOTE: stop the treadmill to hold on the running belt when oiling the running belt. Lower surface in the middle of
running belt.
CLEANING
Frequently clean the treadmill to guarantee its service life.
Warning: cut off the power when cleaning the treadmill. The power line must be pulled out from the socket.
•
After use: clear sweat stains and sundries on instrument and other parts with clean towel and damp cloth.
•
Note: don't use corrosive articles and liquid to prevent damage to electronic elements. Don't expose electronic
•
elements to sunlight.
Every week: clean the ground every week, and clear dirt brought by shoes and other sundries on the ground.
•
Storage: please place your treadmill in clean and dry environment, and ensure that power switch is off and plug is not
in power socket.
Movement and folding: handling wheel is added in design to move the treadmill. Please confirm that power is off and
the body of treadmill is folded before moving.
112