Werbung
Verfügbare Sprachen
Verfügbare Sprachen
OPERATING INSTRUCTIONS
Multi-Function Clock Touch Clock °
Order no. 64 03 29
Intended Use
The product serves as a table clock for your desk or night table. It shows the time, the
temperature, the date and the weekday. The table clock has an alarm and snooze func-
tion. The table clock may only be used in closed, dry rooms at room temperature.
Contact with moisture must be avoided at all times.
Any use other than that described above could lead to damage to this product and
involves the risk of short circuits, fire, electric shock, etc.
Features
•Display of the time in 12 or 24-hour format
•Calendar function
•Display of the room temperature in °C (Celsius) or °F (Fahrenheit)
•Function and simultaneous colour change of the display by touching the display
•Alarm function
1
PRESS
TIME
10
00
:
1. Display
4. Button
2. SET button
5. Button
3. Switch Light On/Off
6. RESET button
Safety Instructions and Hazard Warnings
The guarantee will lapse if damage is incurred as a result of
non-compliance with the operating instructions. We will not
assume any responsibility for consequential damage. We do
not accept any liability for personal injury or damage to prop-
erty caused by incorrect handling or non-observance of the
safety instructions! The warranty will lapse in these cases.
•For safety and licensing (CE) reasons, unauthorised conversion and/or
modifications to the product are not permitted.
•The product may not be subjected to extreme temperatures, strong vibrations, heavy
mechanical strain, direct sunlight or high degrees of humidity. This can damage the
device.
•The table clock is approved only for operation in closed, dry rooms.
•The device is not a toy and should be kept out of the reach of children.
•Do not leave the packaging material lying around carelessly since it constitutes a dan-
ger to children.
•Do not put the product into operation if it is damaged.
•The manufacturer or supplier will assume no responsibility for incorrect displays or the
consequences which arise through an incorrect display.
•Do not use the product in situations in which professional measuring technology is
required.
•The values determined are not suitable for publication.
•If questions arise which are not clarified within the course of these operating instruc-
tions, please contact our technical support or another specialist.
Setup
Take care not to place the device in direct sunlight and protect it
from vibration, dust, heat, cold, and moisture.
Place the table clock on a stable surface and ensure a safe
stand. If the clock falls down, it might injure persons or damage
the clock or the floor.
Place the device on a level and horizontal surface. Do not place
the device on valuable furniture without suitable protection.
Do not place the device close to heat sources like e.g. heaters as
these may falsify the measuring result for the room tempera-
ture.
Version 04/06
2 3
4
5 6 7
8 9
Light
RESET
On
Off
SET
Alarm
+
+
+
LR44
CR2032
CR2032
Unterseite
7. Alarm button
8. Battery compartment
9. Battery compartment
screws
Inserting/changing the batteries
Observe the correct polarity when inserting the battery (posi-
tive and negative).
Keep batteries out of the reach of children. Do not leave batter-
ies lying around. Pets or small children might swallow them.
Mortal danger! If swallowed, consult a doctor immediately.
Batteries may not be shorted, opened or thrown into fire,
Batteries must not be recharged. (Danger of explosion!)
Only use new batteries of the right size and the recommended
type. Do not mix old and new batteries. Chemical liquids may
leak out of overaged or spent batteries and damage the device.
For this reason, remove the batteries when you do not use the
device for a longer period (a month or more).
Leaking or damaged batteries can cause burns if they come into
contact with the skin. You should therefore wear suitable pro-
tective gloves.
•With a screwdriver, unscrew the two screws of the battery compartment (on the bot-
tom of the table clock). Remove the cover of the battery compartment.
•Insert two CR2032 button cells of the same brand and one LR44 button cell observing
the correct polarity. The plus pole of the button cells points towards the battery com-
partment cover.
•Close the battery compartment by replacing the battery compartment cover and
screwing it shut.
Use high-quality batteries to achieve as long a period of operation as pos-
sible.
The display appears after insertion of the batteries. The temperature display is slightly
delayed; the device needs a few seconds to determine the temperature.
A change of the batteries becomes necessary when the display contrast fades or the
brightness of the display.
Initial operation
There is a transport protection foil above the display glass; remove this prior to first use.
Carefully touch the top edge of the display (marked with PRESS) to
switch between the individual display functions. After switching the dis-
play functions, the display is briefly illuminated in colour. Each display
function has its own display background colour.
Display functions:
Time (TIME)
room temperature (TEMPERATURE)
(TIMER)
...
PRESS
PRESS
TIME
10
00
22
TEMPERATURE
:
.
Clock
If necessary, touch the display several times until the time is displayed. The table clock
shows the time in hours and minutes.
Setting the time
•Keep the SET button on the bottom of the table clock depressed until the hour display
starts to blink. Now the clock is in setup mode.
•You can set the hours with the button
•Press SET for confirmation. The table clock changes to the minute setting and the
minute display blinks.
•You can set the minutes with the button
•For terminating the setting process, press the button SET.
The minute display speeds up when the button 5 or 6 is kept depressed dur-
ing the setting process (fast setting).
If no button is pressed, the device leaves setup mode automatically after a short time and
saves the setting.
date (DATE)
countdown timer
PRESS
PRESS
TIMER
DATE
7
3
28
60
00
° C
M
S
:
.
SU MO TU WE TH FR SA
or
.
or
.
PRESS
TIME
10
00
:
Werbung
