Kobra Cyclone Bedienungsanleitung Seite 28

IMPORTANT !!!
WHAT TO DO IN CASE OF A PAPER JAM
( Plastic waste bag is not inflated by the turbine airflow and the shredded material does not get into
the plastic waste bag)
If the machine is overloaded with too much paper (or other material) or in case the
operation of the machine is terminated while the machine is still shredding,the
machine could run into a jam.
Usually a paper jam is due to some paper blocking the rotating blades (jammed
paper between the first blade and the screen) or shredded paper clogging the
turbine exit.
The machine is basically jammed when the plastic waste bag does not inflate or the
blades do not rotate.
In order to clear the paper jam follow these steps:
1. Remove the paper from the shredding chamber and make sure that the blades
are free to rotate
2. Open turbin cover (Fig.13) and remove the shredded paper clogging the
turbine exit.
3. Press the START button without introducing any material into the machine
and check If the plastic waste bag inflates
Fig. 13
28 di 55
GB
DI-129/06/30.03.12