Fein WSG 14-125 Gebrauchsanleitung Seite 15

Instruction manual for angle grinder.
Symbols, abbreviations and terms used.
Symbol, character Explanation
Follow the instructions in the adjacent text!
Do not touch the rotating parts of the power tool.
Follow the instructions in the adjacent text!
Be absolutely sure to read the enclosed documentation such as the Instruction Manual and the
General Safety Instructions.
Before commencing this working step, pull the mains plug out of the socket. Otherwise there
will be danger of injury if the power tool should start unintentionally.
Use eye-protection during operation.
Use ear protection during operation.
Use protective gloves during operation.
An exposed surface is very hot if touched and therefore dangerous.
Confirms the conformity of the power tool with the directives of the European Community.
Worn out power tools and other electrotechnical and electrical products should be sorted
separately for environment-friendly recycling.
Product with double or reinforced insulation
Ø Diameter of a round part
Ø
Ø
H
Ø
T=Thickness of grinding/cutting disc
Ø
D
T
Ø
Ø
D
M=Thread for clamping flange
M
Weight according to EPTA-Procedure 01/2003
Character Unit of measure, international
n /min
0
P W
1
P W
2
M... mm
L dB
wA
L dB
pA
K...
m/s
m, s, kg, A, mm, V, W, Hz, N, °C,
dB, /min, m/s
=max. diameter of grinding/cutting disc
D
=Diameter of mounting hole
H
=max. diameter of backing pad
D
2
2
Unit of measure, national
rpm
W
W
mm
dB
dB
2
m/s
m, s, kg, A, mm, V, W,
Hz, N, °C, dB, rpm, m/s
Explanation
No-load speed
Power input
Output
Size of metric thread
Sound power level
Sound pressure level
Uncertainty
Acceleration
Basic and derived units of
2
measure from the interna-
tional system of units SI.
EN
15