Operation - switel TF540 Bedienungsanleitung

Comfort phone with photo dialling
keys TF540
ENGLISH
Operating Instructions
Please read and observe the
following information and keep the
operating manual nearby for future reference!
WARNING!
Safety information
Risk of explosion!
Only use the power adapter plugs
supplied!
Only use batteries supplied or ones of the
same type!
Always treat batteries with due care and
attention and only use batteries as
described.
Never use standard and rechargeable
batteries together. Never use
rechargeable batteries or standard
batteries with different capacities or
charge statuses together. Never use
standard or rechargeable batteries which
are damaged.
Risk of suffocation through small objects,
packaging and protective foil!
Keep children away from the product and
its packaging!
Risks to health and the environment from
batteries!
Never open, damage or swallow batteries
or allow them to pollute the environment.
They could contain toxic and ecologically
harmful heavy metals.
CAUTION!
Risk of hearing damage!
Avoid listening at full receiver volume.
ATTENTION!
Risk of property damage.
Prevent exposure to environmental
influences, e.g. smoke, dust, vibration,
chemicals, moisture, heat and direct
sunlight.
Only allow repairs to be completed by
qualified personnel.
Contact your telephone network provider
with regard to enabling supplementary
services.
INTENDED USE
The telephone is suitable for telephoning
within a public telephone network system.
Any other use is considered unintended use.
Observe all local directives and regulations.
Unauthorised modification or reconstruction is
not permitted. Under no circumstances open
the device or complete any repair work
yourself.
PACKAGE CONTENTS
1 Base station, 1 Telephone connection cable,
1 Operating instruction
OPERATING ELEMENTS
1 Direct call photo keys
2 Direct call keys
3 Store button, press to store number
4 Mute button
5 R-key (Flash)
6 Redial button
7 Boost function (+40dB)
8 Handsfree ON
9 LED
10 Volume control receiver
11 Volume control handset
12 Tone control
13 Ringer switch
CONNECTION
1. Connect the curly cord to the handset and
to the socket marked on the top side of
the telephone.
2. Connect the telephone line cord of
telephone on the underside of the telephone,
and then to a network wall socket.
3. Position the telephone line cable in the
groove underneath the telephone.
4. Lift the handset and listen for the dial tone.

OPERATION

Using the telephone
1. Lift the handset and wait until you hear the
dial tone.
2. Using the keypad, press the telephone
number you wish to dial or press the photo of
the person you wish to call.
3. To end the call simply replace the handset.
You can adjust the desired receiver volume
by using the button on side of the telephone.
Receiving calls
When you receive a call you will hear the
telephone ring. The call can now be accepted
by lifting the handset.
Recall
Press the recall button R followed by the
extension number to transfer calls when
connected to a PBX (TBR only).
Access to additional network services can be
gained by using the recall button R, * and #
buttons. Contact your network operator for
more information.
Ringer Switch
Use the button to adjust the
ringer volume to OFF/LOW/HI.
Amplification & Receiver volume control
The receiver volume can be boosted up to
+40dB max during a conversation. Press the
+40dB button, and the Boost LED will light.
You can increase the handset volume by
turning the volume control (located under
the handset) to the listening level (1-4).
You can turn OFF the BOOST by pressing
the RED +40dB button at any time during
your conversation, the BOOST LED will turn
off and the volume will return to normal level.
After the call, when you replace the handset
to the cradle, the boost volume will be reset to
normal automatically.
Note: If you do not need this additional
amplification you do not need to press the
RED +40dB boost Button.
Warning: Setting your earpiece volume too
high can damage your hearing!!!
Tone control
When the volume has been boosted up, you
can also adjust the tone control with the Tone
switch. Adjust the sound frequency to suit
your hearing needs.
Hands free function
1. Press . The Hands free speaker will be
activated and the Hands free indicator will