Herunterladen Diese Seite drucken

ZENEC ZE-RVC80MT Montageanleitung Seite 2

Rückfahrkamera
MOUNTING
INSTRUCTIONS
Camera rotates
Due to its compact size the ZE-RVC80MT rear view camera is suitable to be installed at the upper edge of the license plate
or below the rear bumper, depending on car model or customer preferences. The connection cable of the camera can often
be routed alongside the license plate illumination wires – allowing for a quick and trouble free installation process. The high
quality CMOS camera sensor also offers an extended temperature operating range, a waterproof lens assembly (IP68) and
housing, made of durable die cast aluminium.
CAUTION:
*
Following the latest trend in vehicle electronics, newer cars mainly use a pulse width modulated power feed for outer
hull lights, which is unsuitable for imaging/video electronics, as it causes considerable picture distortion.
*
Use the included connection cable exclusively. Altering or replacing it will void your warranty.
Technical Specifications:
Image device:
0.25" CMOS Sensor
TV system:
NTSC
Viewing angle:
140° horizontal
Sensor resolution:
720 x 480 pixels
Resolution of video-out: 480 TV lines
Minimum illumination:
0.3 lux
Video output:
1 Vp-p, 75 ohms
White balance:
Auto
Power supply:
DC 12 Volt typ.
Current consumption:
60 mA max.
IP protection rating:
IP68 water and dust protected
Operating temperature: -30°C to +75°C
Rev. D
ZENEC by ACR AG Bohrturmweg 1 CH-5330 Bad Zurzach Switzerland
EU Legal Representative:
ACR S & V GmbH Industriestraße 35 D-79787 Lauchringen Germany
ZE-RVC80MT
Green: Cable unconnected causes mirror image.
Cable connected to GND yields normal image.
Black: GND
Red: ACC
Yellow: Video Out
(connect to Moni-/Naviceiver)
Technische Spezifikationen:
Kamerasystem:
0.25" CMOS Sensor
TV System:
NTSC
Betrachtungswinkel:
140° horizontal
Sensor Aufl ösung:
720 x 480 Pixel
Aufl ösung Ausgangssignal: 480 TV Linien
Minimale Helligkeit:
0.3 Lux
Video Ausgang:
1 Vp–p, 75 Ohm
Weissabgleich:
Automatisch
Spannungsversorgung:
DC 12 Volt typ.
Stromverbrauch:
60 mA max.
Schutzklasse:
IP68 staub- und wassergeschützt
Betriebstemperatur:
-30°C bis +75°C
REAR VIEW CAMERA
loading