Maintenance & Lubrication; Maintenance & Lubrication Chart - Jacobsen Gp400 Handbuch

8 MAINTENANCE & LUBRICATION
8.1 MAINTENANCE & LUBRICATION CHART ____________________________________________
GASOLINE MAINTENANCE AND LUBRICATION CHART
Interval
First 5-8 hours
Daily
10 hours
Every 25 hours
First 50 hours
Weekly
Every 50 hours
Every 100 hours
Every 200 hours
Every 250 hours
End of season
Every 1000 hours
A = Lift Arm Pivot, B =Cutting Unit Pivot, C = Cutting Unit Bearing Housing, D = Steering Ram Ball Joint,
Refer to Engine Manufacturers Manual for Additional Engine Maintenance Procedures
en-46
Item

Change Engine Oil.

Check Engine Oil Level.

Check Safety Interlock System.

Check Hydraulic Fluid Level.

Check for Hydraulic Leaks.

Check Tyre Pressure.

Check Oil Cooler Screen.

Check Oil Cooler Fins.

Check Bedknife & reel Blades.

Check & Clean Air Filter Element*.

Change Hydraulic Oil Filter.

Change Engine Oil.

Check for Loose Components.

Check Engine Bay For Debris.

Check Battery Condition.

Change Engine Oil Filter.

Change Inline Fuel Filter.

Check & adjust Engine Valve Clearance

Change Hydraulic Oil & Filters

Check Parking Brake Operation.

Check Brake pads.

Drain & Clean Fuel Tank
Lubricate all Grease fittings weekly
* Check more often in dirty conditions
(see diagram)
IMPORTANT