Herunterladen Diese Seite drucken

Intended Use - VOLTCRAFT 322 Datalog Bedienungsanleitung

Schallpegelmessgerät

Werbung

• Ist die Verbindung nicht korrekt, erscheint auf dem Bildschirm die Anzeige "No
Connection"
Mögliche Ursachen:
1. Die serielle Schnittstelle ist bereits durch ein anderes Programm/Gerät belegt. Der
IRQ darf nicht gleichzeitig von 2 Geräten genutzt werden. Schließen Sie die ande-
re Anwendung, bzw. benutzen Sie evtl. die zweite serielle Schnittstelle. Starten Sie
den Computer und die TestLink Software neu.
2. Das Schnittstellenkabel wurde nicht in die RS232 Buchse (11), sondern in das Sig-
nalausgangsterminal (12) gesteckt.
28
Introduction
Dear Customer,
We thank you for purchasing this Sound Level Meter 322 Datalog.
With this Sound Level Meter you have acquired a product constructed to the latest
technological standards.
This product is interference-suppressed. It thereby meets the requirements of
applicable national and European directives. Conformance to these has been
proven; the relevant statements and documents are lodged with the manufac-
turer.
In case of questions, consult our technical information service
Germany: Tel. 0180/5 31 21 16 or 09604/40 88 47
Fax 09604/40 88 44
e-mail: tkb@conrad.de
Mon - Fri 8.00 to 18.00
Austria: Tel. 0 72 42/20 30 60 · Fax 0 72 42/20 30 66
e-mail: support@conrad.at
Mon - Thu 8.00 to 17.00
Fri. 8.00 to 14.00
Switzerland: Tel. 0848/80 12 88 · Fax 0848/80 12 89
e-mail: support@conrad.ch
Mon - Thu 8.00 to 12.00, 13.00 to 17.00
Fri 8.00 to 12.00

Intended use

The Sound Level Meter 322 Datalog is used to measure sound levels in general field
testing up to an intensity of 130 dB in the dB(A) and dB(C) units of measurement.
It is suitable as a test instrument in accordance with IEC 651 Type 2 for laboratory
use or for scientific purposes.
The unit is suitable for battery operation or for operation with a suitable power supp-
ly (not supplied). No other energy supply may be used.
Suitable types of battery are listed under "Technical data". The prerequisites to be
met by a suitable power supply are given under "External voltage supply".
Use with a power supply is permitted only in indoor areas, not out of doors. Contact
with high humidity, e.g. in the bathroom or similar, is to be avoided absolutely.
29

Quicklinks ausblenden:

Werbung

loading