Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Procedure:
Step 1: Unscrew the fixation-screw of the housing-ball.
Step 2: Remove the housing-ball.
Step 3: Remove the old lamp from the lamp-socket.
Step 4: Put the new ELC 24 V/250 W lamp into the lamp-socket.
Step 5: Replace the housing-ball and tighten the screw.
REPLACING THE FUSE
If the lamp burns out, the fine-wire fuse of the PROKALEIDO might fuse, too. Only replace the fuse by a fuse
of same type and rating (F 5 A medium).
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free cloth moistened with any good
glass cleaning fluid. Never use alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
AC 230 V/50 Hz
Power consumption:
300 W
Dimensions:
380 x 255 x 205 mm
(without bracket)
Weight:
9.4 kg
Fitting lamps:
ELC 24 V/250 W
No. 91201310
OMNILUX ELC 24 V/250 W
No. 91201312
Fitting fuse:
Fuse 5x20 mm, medium, 5 A
No. 30207591
Please note: All specifications are subject to change withour prior notice.
1/99
©
Errors and omissions excepted.
English
11
Werbung
Inhaltsverzeichnis
