9. Maintenance and cleaning
• The product requires no servicing from you apart from replacing a work grinding disc.
• Before cleaning, switch off the product and disconnect it from the mains voltage; pull the mains plug from the mains
socket. Wait until the grinding wheel has stopped completely.
• The outside of the product should only be wiped with a clean, soft, dry cloth.
Never use any aggressive cleansing agents or chemical solutions since these may damage the casing or impair its
function.
• Dust can be removed using a brush and, if required, a vacuum cleaner.
10. Disposal
Electronic devices must not be disposed of in the domestic waste!
At the end of its service life, dispose of the product according to the relevant statutory regulations.
11. Technical data
Operating voltage .........................................230 V/AC, 50 Hz
Power consumption ......................................Max. 85 W
Protection class ............................................II
Cable length .................................................1.8 m
Outer diameter of the grinding wheel ...........108 mm
Inner diameter of the grinding wheel ............23 mm
Thickness of the grinding wheel ...................3.2 mm
Rotating speed of the grinding wheel ...........4800 rpm
Angle for the grinding wheel .........................left 35° to right 35°
Angle for the grinding head ..........................-35° to +35°
Operating time .............................................. 20 minutes, then needs to cool down for at least 20 minutes before reuse
Ambient conditions .......................................Temperature: -10 °C to +40 °C
......................................................................Humidity: 0% to 85% rel. humidity, non-condensing
Noise indication (L
) ....................................93 dB
wa
Dimensions ...................................................370 x 230 x 150 mm
Weight ..........................................................2.46 kg
28