Intended Use; Safety Information - VOLTCRAFT HT-200 Bedienungsanleitung

Intended use

The HT-200 is a digital measuring device for measuring humidity and temperature in
the units %RH (percent relative humidity) and °C/°F (degrees Celsius/degrees
Fahrenheit).
The values detected and the current units/functions are displayed digitally on a large
LCD (Liquid Crystal Display).
The temperature and humidity values measured enable the HT-200 to determine the
dew point (temperature when the humidity of the air condenses) as well as the Wet
Bulb (evaporation temperature).
The minimum and maximum value can be automatically saved and the current dis-
play contents can be kept with the Hold function.
The HT-200 has optional display lighting.
A 9-V block battery (type 1604A) is required for operation.
Measurements must not be carried out under unfavourable ambient conditions.
Unfavourable ambient conditions include the following: Dust and inflammable gas-
es, vapours or solvents, storms or stormy conditions such as strong electrostatic
fields, etc.
Use other than that described above will lead to damaging the product.
No part of the product may be modified or altered!
The safety instructions should be observed without fail!

Safety information

Please read through the operating instructions completely before set-
ting up the system; they include important information necessary for
correct operation.
The guarantee does not cover damage incurred as a result of non-com-
pliance with the operating instructions. We shall not be held liable for any
consequent damage or loss.
We shall not accept any liability for damage to property or personal injury caused by
incorrect handling or non-compliance with the safety instructions. The guarantee
will become void in these cases.
This device left the factory in perfect technical condition. To maintain this status and
ensure safe operation, the user must comply with the safety instructions and warn-
ings contained in these instructions for use. The following symbols must be
observed:
13