Setting The Loudness; Loudness; Connecting Auxiliary Audio Equipment - Sony CDX-NC9950 Bedienungsanleitung

Setting the loudness

— Loudness

The bass and treble will be reinforced to enjoy
clear sound at low volume.
1
Press (SOURCE) to select a source
(radio, CD, MD or AUX).
2
Press (MENU).
3
Press < or , repeatedly to select
"Sound," then press (ENTER).
4
Press < or , repeatedly to select
"Loudness."
5
Press (ENTER) repeatedly to select
"ON."
6
Press (MENU).
The display returns to the normal display.
To cancel the loudness, select "OFF" in step 5.
Connecting auxiliary audio
equipment
You can connect optional Sony portable devices
to the BUS AUDIO IN/AUX IN terminal on the
unit. If the changer or other device is not
connected to the terminal, the unit allows you to
listen to the portable device on your car speakers.
Note
When connecting a portable device, be sure BUS
CONTROL IN is not connected. If a device is
connected to BUS CONTROL IN, "AUX" cannot be
(SOURCE)
selected with
Selecting auxiliary equipment
Press (SOURCE) repeatedly to select
"AUX."
28
.
Adjusting the volume level
— AUX Level
You can adjust the volume for each connected
audio equipment.
1
Press (MENU).
2
Press < or , repeatedly to select
"Sound," then press (ENTER).
3
Press < or , repeatedly to select
"AUX Level," then press (ENTER).
4
Press < or , repeatedly to adjust
the volume level, then press (ENTER).
The volume level is adjustable in 1 dB steps
from –6 dB to +6 dB.
5
Press (MENU).
The display returns to the normal display.