Display Items; Receiving The Stored Stations - Sony CDX-NC9950 Bedienungsanleitung

Display items

Information on the station/frequency currently
selected is automatically displayed.
Positions of display items differ depending on
the selected face pattern.
For details, see "Selecting the face pattern" on
page 20.
When "Skin1" is selected.
A
When "Skin2" is selected.
A C
When "Skin3" is selected.
A
B
A Source/Band number
B Function and mode status
ST: Stereo reception mode
: ATT
AF: AF function
TA: Traffic announcements
TP: Traffic programme
: DSO
: EQ7
C :Preset number/Frequency, Current status/
Messages

Receiving the stored stations

1
Press (SOURCE) repeatedly to select
the radio.
2
Press (MODE) repeatedly to select the
desired band.
Radio reception of the desired band starts.
Operation by the card remote
commander:
To
Stop radio
reception
Receive stored
stations
– Preset search
Search stations
– Automatic tuning
Specify
B
frequencies
– Manual tuning
Operation by the main unit:
To
C
Stop radio
reception
Receive stored
B
stations
– Preset search
Search stations
– Automatic tuning
Specify
frequencies
– Manual tuning
C
* To stop searching, rotate the R dial in the reverse
Tip
If automatic tuning stops too frequently, set "Local" in
"PlayMode" to "ON." Only the stations with relatively
strong signal will be tuned in (Local seek mode).
If FM stereo reception is poor
— Mono
1
To restore stereo reception, set to "OFF."
Tip
If FM broadcasts are difficult to hear, set "DSO" in
"Sound" to "OFF" (page 25).
Press (OFF).
Press (1) to (6).
Press M/m
[until the desired station].
Press </,
[until the desired station].
Press </,
[hold until the desired
frequency].
Press (OFF).
Rotate the R dial
[until the desired station].
Press (ENTER) once, then
rotate the R dial*
[until the desired station].
Press (ENTER) twice, then
rotate the R dial
[until the desired
frequency].
direction.
Set "Mono" in "PlayMode" to "ON."
The sound improves, but becomes monaural.
17