Adjusting The Front And Rear Volume; Balance/Fader; Adjusting The Subwoofer Volume; Sub Woofer - Sony CDX-NC9950 Bedienungsanleitung

Adjusting the front and rear
volume

— Balance/Fader

You can adjust the volume balance between right
and left speakers (Balance), and front and rear
speakers (Fader).
1
Press (SOURCE) to select a source
(radio, CD, MD or AUX).
2
Press (MENU).
3
Press < or , repeatedly to select
"Sound," then press (ENTER).
4
Press < or , repeatedly to select
"Balance" or "Fader" then press
(ENTER).
To adjust the balance between right and left
speakers, select "Balance."
To adjust the balance between front and rear
speakers, select "Fader."
5
Press < or , repeatedly to adjust
the balance, then press (ENTER).
6
Press (MENU).
The display returns to the normal display.
Adjusting the subwoofer
volume

— Sub Woofer

1
Press (SOURCE) to select a source
(radio, CD, MD or AUX).
2
Press (MENU).
3
Press < or , repeatedly to select
"Sound," then press (ENTER).
4
Press < or , repeatedly to select
"Sub Woofer," then press (ENTER).
5
Press < or , repeatedly to adjust
the volume level, then press (ENTER).
The volume level is adjustable in 1 dB steps
from –∞, –10 dB to +10 dB.
6
Press (MENU).
The display returns to the normal display.
Tip
"– ∞" appears when the volume level is below –10 dB.
Adjusting the cut-off
frequency for the speakers
and subwoofer(s)
— HPF/LPF (High pass filter/Low pass filter)
To match the tone range of the speakers and
subwoofer(s), you can select the cut-off
frequency.
Example: "78Hz" is selected for both "HPF" and
"LPF."
Cut-off frequency
off
78
Frequency (Hz)
tone range of speakers
tone range of subwoofer(s)
1
Press (SOURCE) to select a source
(radio, CD, MD or AUX).
2
Press (MENU).
3
Press < or , repeatedly to select
"Sound," then press (ENTER).
4
Press < or , repeatedly to select
"HPF" or "LPF," then press (ENTER).
5
Press < or , repeatedly to select the
desired cut-off frequency, then press
(ENTER).
6
Press (MENU).
The display returns to the normal display.
To cancel the cut-off frequency, select "OFF" in
Step 5.
Tips
• Select the same cut-off frequency for both "HPF"
and "LPF."
• "HPF" can be adjusted when the subwoofer is not
connected. Only low frequency signals are cut.
125
27