Wear Parts - Oase ProMax Rain 4000 Gebrauchsanleitung

Cleaning the filter screen
N O T E
Recommendation regarding cleaning:
• Clean the filter screen as required, but
at least once per month.
How to proceed:
 H
1. Turn the filter screen clockwise as far as
it goes and then remove it from the unit.
2. Clean the filter screen in clean water.
3. Reassemble the unit in the reverse or-
der.
Replacing the handle
How to proceed:
 I
1. Turn the handle to a 45° position.
2. Release the handle from the holder by
pulling with both hands at the side.
3. Fit the spare part onto the unit in the re-
verse order.
Replacing the filter screen
How to proceed:
 H
1. Turn the filter screen clockwise as far as
it goes and then remove it from the unit.
2. Fit the spare part onto the unit in the re-
verse order.

WEAR PARTS

Wear parts are excluded from the war-
ranty.
The following components are wear parts
and may only be replaced by the OASE
Service.
• Impeller
STORAGE/OVERWINTERING
The unit is not frost-proof and has to be
removed and put into storage if minus
temperatures are expected.
How to correctly store the unit:
• Drain the unit as far as possible, clean
thoroughly and check for damage.
• Empty all hoses, pipes and connections
as far as possible.
• Thoroughly clean the unit, check it for
damage and replace any damaged
parts.
• Store the unit in a dry and frost-free
place.
• Protect open plug connections from
moisture and dirt.
DISPOSAL
N O T E
This unit contains electronic components
- do not dispose of this unit with domestic
waste.
• Render the unit unusable by cutting off
the cables.
• Dispose of the unit by using the return
system provided for this purpose.
DE
EN
FR
NL
ES
PT
IT
DA
NO
SV
FI
HU
PL
CS
SK
SL
HR
RO
BG
UK
RU
CN
17