SELFSAT SNIPE DOME Bedienungsanleitung Seite 15

14
03. Open the data file(*.idt) as the pictures.
04. Click [Connect] button and check [update]
button has been activated as the following
picture.
05. Check the satellite and TP to update, and click
[UPDATE].
NOTE
At lease 1 TP should be selected
for updating. Satellite should be
updated one by one.
06. he update process will be indicated as the
picture.
NOTE
The GPS LED will be blinking while updating.
(If the update is not going correctly, the LED
will not be blinking. In this case, please
check if all the cables for main unit –
controller – PC are all correctly connected
and the controller Led is turned on)