SELFSAT SNIPE DOME Bedienungsanleitung Seite 10

3. Operating Instruction
D. Changing the satellite
Function
Up / Down button" Light
E. Back to Basic position
Function
"Stand by" Button
F. GPS LED light
Function
Description
"Satellite
i. If you want to change desired satellite, you can change the
target satellite using the "Up/Down" buttons, then press
the "OK" button to select the new satellite.
"OK" Button
Description
i. Whenever you wish to return the antenna back to the Basic
position, press and hold the "STAND BY" button for a few
seconds.
Description
i. GPS LED confirms the current location from 24 GPS satellites
in the world.
ii. When your SNIPE DOME identifies a GPS signal, GPS LED
light will remain on, regardless if the antenna is pausing or
moving.
"GPS" light
GPS can help to search for the satellite faster & catch the
optimum satellite signal, and assist SNIPE DOME to acheive
the best elevation.
iii. Also, while Satellite Information updating, the GPS LED
light will flash to show the update procedure is processing.
During this time, GPS LED light on doesn't mean the unit is
communicating with GPS satellite.
Operation
Operation
Operation
9