Intended Use; Operating Controls - VOLTCRAFT BS-1000 Bedienungsanleitung

Intended Use

The endoscope basic device is a visual aid for optical troubleshooting and inspection at powered-down
systems and facilities in connection with a separately available endoscope camera.
The camera image is displayed on the integrated TFT monitor, and the lighting in the tip of the camera
can be controlled smoothly with this endoscope basic device. A PAL/NTSC video output is available The
swan neck cameras that can be connected ware water-tight and suitable for use in watery liquids (no
acids or lye). The basic device must not be exposed to humidity or submersed.
Voltage supply is achieved through an integrated LiPo battery or power supply that can be operated with
100 - 240 V/AC, 50/60 Hz. Operation in explosive atmospheres or use with persons and animals is not
permissible.
Uses other than those described above are not permitted. They can lead to damage to the product and
injuries. No part of the product must be modified or rebuilt!
Always observe the safety instructions!

Operating Controls

See fold-out page
1 TFT monitor
2 "ESC" button
3 "OK" button
4 Button
5 Button
6 Button
7 Button
8 Button
9 Mini-USB port
10 LED control wheel
11 SD card slot
12 Video output socket
13 DC input socket
23