Output Video Signals To A Tv - VOLTCRAFT BS-1000 Bedienungsanleitung

Output Video Signals to a TV

If you want to connect the endoscope to a TV via the video output, you first need to
determine your TV standard (see chapter Video Format)
Also observe the indications on your TV.
The endoscope enables image output for recording and documentation via an integrated composite
video output. The output socket is on the right of the device. Use the included video cable to establish
the connection to your playback or recording device.
Switch on the endoscope
Plug the jack into socket (12) of the endoscope basic device.
Connect the cinch plug to the video input of your playback or recording device.
Select your TV device's video input.
Also observe the notes in the operating instructions of your playback or recording
device.
Press the "OK" button at the BS-1000 once to call the menu.
Use the button
and press "OK".
The camera image is displayed if the video source is correctly connected and chosen.
To switch off, press the on/off button (4) briefly. The device and the video output switch off.
By disconnecting the video cable from the BS-1000 or your TV device, the basic device
automatically switches to preview mode.
34
/ , to move the cursor upwards or downwards and then chose "Video Output"