Digital Zoom
The recorded image can be enlarged in ten stages (max. 2.0 times). For this purpose, proceed as follows:
Press the "OK" button once to call the menu.
Use the buttons
and press "OK".
The endoscope switches back to preview mode with the activated function "Digital Zoom". Press the but-
ton
/
to zoom in or out.
To switch off digital zoom again, call the menu, select "DIGITAL ZOOM" and press "OK" again.
Mirror Function / Image Rotation
Press the "OK" button once to call the menu.
Use the buttons
press "OK".
Use the buttons
DISABLE
HORIZONTAL
VERTICAL
FOLD
Setting Video Output Format
To play back the recorded images/videos, first set the correct playback format.
For this purpose, proceed as follows:
1. Press the "OK" button once to call the menu.
2. Use the buttons
"Video Format" and press "OK".
3. Select the correct video format with the button
For correct connection of the video cable, please also observe the notes in chapter
"Output Video Signals to a TV".
PAL is the European TV standard. If you are using a TV that uses the North-American TV
standard NTSC, use this selection instead.
32
/
to move the cursor upwards or downwards and then chose "DIGITAL ZOOM"
/
to move the cursor upwards or downwards and then chose "MIRROR" and
/
to move the cursor upwards or downwards and to chose the desired effects.
No effect
The image is mirrored horizontally.
The image is mirrored vertically.
The figure is rotated by 180°.
/
to move the cursor upwards or downwards and then chose the menu item
/
and press "OK" to confirm.