Transportation And Storage; Technical Data - McCulloch B43BT Bedienungsanweisung

Note: Sharpen the edges of the teeth with a flat file if
the blade is heavily worn. Continue to sharpen with a
round file.
• Sharpen all edges equally to keep the blade
balanced.
• Adjust the blade set to 1 mm (0.04 in) with the
recommended setting tool. Refer to the instructions
that come with the blade.(Fig. 78 )
WARNING: Always discard a blade that is
damaged. Do not try to make a bent or
twisted blade straight and use it again.
• Keep equipment safe during transportation to
prevent damage and accidents.
• Keep the product and equipment in a dry and frost-
proof area.
• Clean the product.
Engine Specifications
Cylinder displacement
Cylinder bore
Stroke
Idling speed
Maximum speed
Speed of output shaft
Maximum engine output
Spark plug
Electrode gap
Fuel tank capacity
Noise and Vibration Data
Equivalent vibration level (ahv, eq), equipped
with grass blade, left/right handle - see note 1
Equivalent vibration level (ahv, eq) equipped
with trimmer head, left/right handle - see note 1
Equivalent vibration level (ahv, eq) equipped
with saw blade left/right handle - see note 1
Sound power level, guaranteed (L
2
Sound power level, measured - see note 2
462 - 002 - 07.02.2018

TRANSPORTATION AND STORAGE

TECHNICAL DATA

) - see note
WA
To sharpen grass cutters and grass
blades
1. Sharpen grass cutters and grass blades with a
single-cut flat file.
2. Sharpen all edges of the grass cutters and blades
equally to keep the balance.(Fig. 79 )
• Replace or repair damaged components.
• Use the correct protective cover on the product that
does not keep moisture.
• Keep the product tightly attached during transport.
unit
3
cm
mm
mm
rpm
rpm
rpm
kW/rpm
mm
litre
2
m/s
2
m/s
2
m/s
dB(A)
dB(A)
B43BT
43
40,0
34,0
2700 - 3300
10000
7000
1,25/7000
QCJ-8Y
0,65
0,8
4,6/4,3
4,2/4,5
4,4/4,2
118
110
21